General Talks → Software and Hardware Discussion → Auto and Truck Repair Software

18 Jul 2009, 19:11

i started this thread to move posts from releases to a better place. i personally have over 400gb of software for auto and trucks. i have no problem sharing what i have but would rather not just give there are still things i could use others may have. i'm gonna throw qut a bunch of keywords lets see what happens.

alldata, mitchell ondemand, heavy truck, collision repair, crs, cummins, incal, insite, detroit diesel, dddl, ddrs, drs, allison doc, eaton serviceranger, bendix, acom, caterpillar cat et stw sis, hollander, international navistar md dlb ipc intune abs, fleet, master diagnostic

jabkissmya wrote it is a shot in the dark, but if you come across detroit diesel calibration tool

if you are referring to ddrs it's here: http://astatalk.com/release/4784/1/Detroit_Diesel_Diagnostic_Links/
if you need flash files lol i could use those too

lastkiller666 wrote hello every body i have a question about reseting ECU for cummins engine can u help me also i hae VACADS PRO 2.35 CAtterpillar 2009 ALLISSON if anybody was intrested i can help him

first you question ask away if i can't answer i'll find answer for you. ok i can't get vcads to update 2.35.20 or above or i get an error, are you having same problem? i have allison 8.1 with programing unlocked, cat et 2009a with factory password maker is in releases unless you have 2009b. what about stw or sis i know i'm not the only one looking

HERUSAMX wrote do you have the lastest version (incal) july 2009?

i know who does perhaps he will share

Rating 3 Comments 169

jabkissmya 18 Jul 2009, 20:26 #

no not ddrs or drs, is called ddct dettroit diesel calibration tool.

iowaautotech 18 Jul 2009, 20:47 #

jabkissmya
never heard of that i'll have to check it out. any idea how old it is or a version number? well as a consolation anything else you're looking for? oh, did you see the 6.45 and 7.04 dddl update disk is in that release?

jabkissmya 18 Jul 2009, 21:45 #

yes i have.

hubkonek 19 Jul 2009, 16:00 #

Hello everybody, now I'm reading your post and maybe you can help me
I'm searching a software but I can't find it

, his name is International Nets v3.0,
I read that you can share me it if you have it, please I'll hope to anybody help me, see you later.
Sorry for my english, but this is not my language :P I try write it.

kboonhower 20 Jul 2009, 02:42 #

Nets 3.0 will be useless to anyone but International Dealers. NETS sends the files over the internet to international then you recieve them back from there server, but you must have a dealer logon and password to send and receive files, so unless you have that there is no point to have the software.

I am pretty familiar with most truck software so if you have any questions I will be glad to help.

kboonhower 20 Jul 2009, 02:43 #

Incal is a huge file 4gigs and a new version every month would take up a lot of bandwith

iowaautotech 20 Jul 2009, 06:04 #

kboonhower
i was asked about detroit diesel calibration tool ddct have you heard about it? i searched the net and found nothing even on the detroit diesel web site.

jabkissmya 20 Jul 2009, 10:57 #

iowaautotech, you have found nothing because it is engineering software, search for autousa3 thereis a website you will find a little info on it there.

lastkiller666 21 Jul 2009, 16:12 #

any body knows how we can improve cummins engine prformance (increase engine thrust) in up sloop (up hill)
whats the affected parametere to improve it?

iowaautotech 21 Jul 2009, 18:08 #

jabkissmya
i did as you suggested. it sounds like a great thing and similar to some of the high performance reprogrammers for american cars. $2500 for something that there is no way to know if it works is crazy. this site certainly has a large selection of software for sale. i am constantly amazed by these overseas websites they seem to be able to get any oe software and have a working copy on the market.

jabkissmya 21 Jul 2009, 22:34 #

the problem is not getting software it is getting metafiles to use software. but yes they charge way too much!

tecsec 24 Jul 2009, 17:16 #

Hello
Any have the software and keygen for John deere service advisor.
The Detroit Diesel Calibration Tool is a software for enable engine brake, change en number serie from ECM and have other funcions.

jabkissmya 24 Jul 2009, 22:44 #

tecsec, do you know where to get detroit metafiles?

rick2001123 27 Jul 2009, 07:23 #

I am looking for allison doc aed it is the diagnostic program for the new hybrid electic trans

mentos 27 Jul 2009, 07:28 #

lastkiller666, can u help me crack or keygen for VCADS PRO 2.35 ? i installed software but not log in to it, i don't have ID and Digipass. please lead me !!!

cannotshoot 31 Jul 2009, 04:04 #

I am havin a problem getting dddl to work...any help would be awesome i download and install but there is no dddl.exe file where it say it should be...i need help!!

smoreno 02 Aug 2009, 08:01 #

Hi mentos can you share a copy of VCADS PRO 2.35

lutton19 14 Aug 2009, 10:49 #

hi i'm looking for the program hollander ebook. it is for seeing if one part on a car can be used on a different make and model of cars help me if you can thanks

ionwind 22 Aug 2009, 15:26 #

The last Incal is about to expire, is there a crack or anything to get by this expiration time?, or a newer incal out?

cablejon 24 Aug 2009, 19:57 #

is there an emulator or a way around having to purchase the comm adapter for use with Caterpillar ET?

sermortri 24 Aug 2009, 22:08 #

hello no speak ingles but I HAVE CAT-TOOL AND METAFILES

sermortri 29 Aug 2009, 02:08 #

HELLO JABKISSMYA

jabkissmya 30 Aug 2009, 03:26 #

yes

lsinc1 03 Sep 2009, 23:15 #

Does anyone have a keygen for the International truck servicemaxx program?

Tocopillar 05 Sep 2009, 06:53 #

Hi.. I've heard that the GM mechanics now uses a communication adapter that is RP1210A Compliant. This should mean that I should be able to use my Caterpillar Communication Adapter on my Chevy if I make a connection cable that fits the OBD-II connector. Anyone found the GM software that is needed..?? I believe the name of the software is "TIS". Anyone know something about this...., or have tried, please comment..